amtast1@gmail.com
 
PRODUCTS
Current position:home >> Products >> A~F >> Color Spectrophotometers
 

AMT505H Color Spectrophotometer

 
 

AMT505H Color Spectrophotometer


Brief Introduction:

1. Portable spectrophotometer adopts internationally agreed geometry D/8 (Diffused illumination, 8 degrees observe angle) and SCI (specular component included) / SCE(specular component excluded). It could be used for color matching for many industries and widely used in painting industry, textile industry, plastic industry, food industry, building material industry and other industries for color quality control.

2. Camera to view the measurement area. In previous measurement instrument, we can only aim at the testing area approximately which may introduce errors. Our spectrophotometers include a camera in our optical system, and the user can clearly see the measurement area to avoid measurement errors.

3. CLEDs light source. spectrally balanced LED light source.

4. Every Test Calibration Technology (ETC).

5. Color QC Software. Our spectrophotometer comes with PC color QC software, which is applicable in various industries for management of color data. It is used for store test result,generate test report and print test report after connect with printer.

6. Automatic Gloss Compensation Technology. Gloss will greatly affect the measurement of color. Our instrument adopts automatic gloss compensation technology which guarantees the accuracy of color measurement value for surfaces of different gloss. This research finding is published in international leading, SCI included journal, Optik.

7. Innovative light splitting SCS optical engine. Adopt innovative single-grating-dual-light-paths light splitting system: SCS optical engine which creates the best measurement repeatability for portable spectrophotometers and guarantees accurate measurement of surface color of materials.

8. The most complete light sources compares with similar products. Comparing with similar products, our spectrophotometers offer the most complete, 28 kinds of standard light sources and 40 measurement color value indicators; It can also customize measurement methods according to your requirement, and satisfy all your color measurement needs.


Specifications:

1. Illumination: d/8 (Diffused lighting, 8 degrees observe angle), SCI (specular reflection included) / SCE (specular reflection excluded)simultaneous measurement. (conform to CIE No.15, ISO 7724/1, ASTM E1164, DIN 5033 Teil7, JIS Z8722 Condition C standards)

2. Size of integrating sphere: Φ40mm, Avian diffused reflection surface coating. 

3. Illumination Light source: CLEDs (entire wavelength balanced LED light source). 

4. Sensor: dual light path sensor array

5. Wavelength range: 400~700nm

6. Wavelength interval: 10nm

7. Half spectral width: 5nm

8. Reflectivity range: 0~200%

9. Reflectivity resolution: 0.01%

10. Observation angle: 2°/10°

11. Measurement light source: A, C, D50, D55, D65, D75, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, DLF, TL83, TL84, NBF, U30, CWF

12. Data being displayed: SPD distribution/data, sample's color values, color difference values/graph, pass/fail results, color error tendency, color simulation, display measurement area, history data color simulation, manual input standard sample, generate measurement report.

13. Measurement time interval: 0.5 seconds

14. Measurement time: 1 second

15. Color space: CIE-L*a*b, L*C*h, L*u*v, XYZ, Yxy, Reflectance; Hunterlab, Munsell MI, CMYK, RGB, HSB

16. Color difference formulas: ΔE*ab, ΔE*CH, ΔE*uv, ΔE*cmc (2:1), ΔE*cmc (1:1), ΔE*94, ΔE*00, ΔEab (Hunter), 555 shade sort

17. Other colorimetric indices: WI (ASTM E313-10, ASTM E313-73, CIE/ISO, AATCC, Hunter, Taube Berger, Ganz, Stensby); YI (ASTM D1925, ASTM E313-00, ASTM E313-73); Tint (ASTM E313,CIE,Ganz); Metamerism index Milm, Stick color fastness, Color fastness; ISO luminance, 8 gloss, A density, T density, M density, E density.

18. Repeatability: light splitting reflectivity: Standard deviation within 0.08%; color values; ΔE*ab<=0.03 (After calibration, standard deviation of 30 measurements on test white board, 5 second intervals); Maximum: 0.05

19. Battery capacity: rechargeable, 10000 continuous tests, 7.4V/6000mAh

20. Interface: USB

21. Data storage: 20000 test results

22. Light source longevity: 10 years, 3 million tests

23. Inter-instrument agreement: ΔE*ab within 0.2(BCRA color charts II, average of the 12 charts)

24. Size: 181*73*112mm(L*W*H)

25. Weight: about 550g (does not include battery's weight)

26. Display: True color screen that includes all colors

27. Work temperature range: 0~45℃, relative humidity 80% or below( at 35°C ),no condensation

28. Storage temperature range: -25℃ to 55℃, relative humidity 80% or below (at 35°C), no condensation

29. Standard accessories: DC adapter, Lithium battery, manual, color management software, drive software, electronic manual, color management guide, USB cable, black/white calibration tube, protective cover, spire lamella, portable bag, electronic color charts, measurement and test report

30. Optional accessories: powder molding device, micro printer

31. Color matching system: match

32. UV light source: without UV light source

 

Amtast USA Inc.   TEL: amtast1@gmail.com

438 Skyline Dr E Lakeland FL.33809 USA FAX: +1-815-3663903 EMAIL: amtast1@gmail.com

Copyright © 2011~2023 www.amtast.com